Browse the shop by brand. Every listing shows photos of the actual item and a clear condition grade, so you know exactly what arrives.
4Slotters is an independent specialist shop and is not affiliated with or endorsed by these manufacturers; brand names belong to their respective owners.
Subcategories
Fly BMW 3,5 CSL #42 24h Le Mans 1976
In stock
The black #42 BMW 3.5 CSL carries blue-and-red striping for the 1976 24 Hours of Le Mans. Its display base names Sam Posey, Hughes de Fierlant and Harald Grohs, while Bosch and Goodyear logos appear on the car. Listed in new condition, this is a 1:32 analog Fly slot car shown in its clear case. The BMW 3.5 CSL #42 is a legendary racing car that competed in the 24 Hours of Le Mans in 1976. The car was deployed by the team of BMW Motorsport / Alpina-Faltz and competed in the brutal Group 5 class. Below you will find the most important details about this iconic racer: Results & Specifications (Le Mans 1976) Category Details Drivers Harald Grohs (DE) , Sam Posey (US) 🇺🇸, Hughes de Fierlant (BE) Class Group 5 (Special Production Cars) Classification 10th place general and 4th in the Group 5 class Car & Motor BMW E9 CSL with a 3.5-liter six-in-line broad builder Livery / Sponsor Characterized by a distinctive black base with red and blue accents, sponsored by the French cigarette brand Gitanes (often referred to as the Alpina-Gitanes livery). Details of the Car Survivor: The 24 Hours of Le Mans in 1976 was a wear and tear for the factory BMWs. Car #42 was the only official Group 5 CSL to reach the finish line. For example, the sister car (#43 with Dieter Quester) fell out in the 12th hour due to a motorcycle fire. Appearance: In accordance with the Group 5 regulations, the car had extremely widened wheel arches and the characteristic giant rear wing (which gave the CSL the nickname "Batmobile"). Also typical were the side-pipe outlets that stuck out on the side. Modeling & Slotcars Because of the unique black Gitanes-livery, the #42 is a very popular collectible: Slotcars (1:32): Released by brands such as Fly Slot Cars (under reference A683) and more recently by Racer Sideways. Diecast & Resin Models (1:43): High-quality miniatures have been produced by Spark Models (also featured in the Hachette Le Mans series) and Atlas.
Fly BMW M1 #80 BASF Procar 1980
In stock
Concentric white graphics make the red BASF livery the focus of this new Fly BMW M1 Procar number 80. The clear display case identifies the 1980 car with Hans-Georg Bürger. White wheels and the detailed race cabin complete the model's period Procar appearance. The BMW M1 Procar #80 with the iconic 1980 BASF livery is one of the most legendary and visually recognizable racing cars in motorsport history. The car was deployed in the infamous BMW M1 Procar Championship, a Formula 1 support class in which F1 drivers competed in identical M1s against touring car drivers. Historical Context & Performance The Team: The car was run by the well-known team GS Sport (GS Tuning). The Drivers: In the Procar season of 1980, the car with starting number 80 was mainly driven by the legendary German driver Hans-Joachim Stuck, who achieved a 3rd place in the championship. The young talent Hans-Georg Bürger also took a seat behind the wheel in 1980. The Chassis: This was chassis #WBS59910004301098. After the Procar season, the car was deployed in the German DRM championship. Unfortunately, disaster struck in July 1981, when the car crashed heavily on the Salzburg ring. The Design: The livery — consisting of striking, concentric red and white circles that were supposed to represent the sound waves of a cassette tape — was designed as a marketing campaign for the audio cassettes of chemical giant BASF. Scale Models and Slotcars Due to the immense popularity of this particular design, the M1 #80 BASF has become a sought-after collectible in the world of model cars and slotcars: WORK83 BMW M1 Procar #80 (1:18): Features: High-quality diecast/metal model with opening doors and a detailed representation of the legendary red wheelbrings and engine compartment. Carrera Digital 132/124 "BASF No. 80": Features: Beautifully moving slotcars at scale 1:32 and 1:24, equipped with working front, rear and brake lights for use on digital racetracks. Information and specifications can be found on the official website of Carrera. Minichamps BMW M1 Procar BASF #80 (1:18 / 1:12): Features: Very exclusive and detailed scale models for the premium collector, often produced in limited editions
Fly BMW M3 E30 #6 Marlboro Ponce
In stock
The Fly Car Model BMW M3 E30, with start number #6, driven by the legendary Canary rally driver José María Ponce (together with co-driver Gaspar León). This 1:32 scale model replicates the car with which Ponce won the 19th Rallye El Corte Inglés in 1995. Specifications & Model Details Manufacturer: Fly Car Model (made in exclusive cooperation with HobbySlot Toñi Ponce Sport). Reference number: FL99071 (or 99071). Series: Ponce Motorsport Colección Edition: Limited and numbered edition of 1,000 pieces worldwide. Dorsal / Start number: #6. Sponsors/Livery: Characteristic white-red color scheme with main sponsorship of Marlboro and 7Up.
Fly BMW M3 GTR #21 Yellow Corn JGTC 2002
In stock
Yellow Corn's yellow-and-orange graphics make this #21 BMW M3 GTR hard to miss. The display base identifies the car with the 2002 JGTC and names M. Hitotsuyama, Y. Kikuchi and Y. Hitotsuyama. This new 1:32 analog slot car also carries visible Dunlop and Takata markings.
Fly BMW M3 GTR #50 24h Daytona 2002
In stock
Silver bodywork, American flag graphics and large EMC branding distinguish this #50 BMW M3 GTR. The model represents the 2002 24 Hours of Daytona and carries AASCO markings. Its listed crew is Andy Hajducky, Craig Stanton, Takashi Suzuki and Javier Quiros. The 1:32 analog slot car is offered in new condition and shown in a clear display case.
Fly BMW Set 320i & 3.5CSL Jagermeister "USED"
In stock
Two orange BMW racers share this Fly Jagermeister presentation set: a 3.5 CSL #11 and a 320i #12. H+T Motor Racing details continue across the decorated box. The set is sold as used and has not yet been inspected. Mirrors or other small parts may be missing, so completeness cannot be guaranteed.
Fly chassis Dodge Viper Ref B72
In stock
Fly's replacement chassis for the Dodge Viper, reference B72, new and unopened in its factory bag. The header card label reads 'Ref. B72 Nuevo chasis Viper', as pictured. With this spare a tired Fly Viper can be put back on track with a fresh, straight chassis.
Fly chassis Ferrari 512S Ref B43
In stock
Conditie: NEW ORIGINAL BOX
Fly Chassis Lola B10
In stock
A black moulded 1:32 Fly chassis for a Lola slot car is supplied in sealed parts packaging. Its mounting points, axle locations and rear structure remain visible through the bag. The part is intended for a compatible repair or rebuild.
Fly Chassis Lola T70
In stock
A sealed Fly B77 parts bag contains this new 1:32 chassis for the Lola T70. The black moulded base is visible through the packaging. Its mounting points and axle locations provide the foundation for a compatible repair or rebuild.
Fly Chassis Marcos Ref B27
In stock
For a Marcos repair project, this new Fly 1:32 chassis provides the bare replacement base. The black moulded component is shown inside a sealed Fly parts bag. Its mounting points and axle openings are visible through the packaging.
Fly Chassis Panoz Ref B57
In stock
Fly's Ref. B57 replacement chassis is intended for a Panoz 1:32 slot car. The first photo shows the black chassis in a Fly-branded parts bag with a B57 Panoz label. Because the second image instead shows Ref. B29 for Marcos, the exact photographed contents require verification.
Fly chassis Porsche 908/3 Ref B84
In stock
Conditie: NEW ORIGINAL BOX
Fly chassis Porsche EVO Ref B61
In stock
Made as a replacement base for a Porsche EVO, this new Fly chassis is scaled to 1:32. The black moulded part comes in a Fly parts bag. It provides the foundation for rebuilding a compatible Porsche slot car.
Fly chassis Porsche GT1 EVO Ref R20
In stock
Built for the Porsche GT1 EVO, this new 1:32 Fly chassis carries reference R20. The black moulded component comes in its original Fly parts bag. It forms the replacement foundation for a compatible car.
Fly chassis Porsche GT1 Ref B33
In stock
Conditie: NEW ORIGINAL BOX
Fly Chassis Venturi Ref B22
In stock
An original Fly spare chassis for the Venturi, reference B22, still sealed in the factory bag with the blue Fly Car Model header card. The label reads 'Ref. B22 Chasis Venturi', as shown in the photo. A useful part for restoring a Fly Venturi with a damaged or missing chassis.
Fly Chevrolet Corvette C5 #01 Speedvision GT 2000
In stock
Flame graphics and a yellow-to-purple colour scheme give Bill Cooper's #01 Corvette C5 an unmistakable Speedvision GT look. BF Goodrich and GMAC markings complete the photographed livery.This new 1:32 analog Fly model uses an inline motor layout.
Fly Chevrolet Corvette C5 Convertible
In stock
A metallic-grey finish and open cabin define this Fly Corvette C5 Convertible. The photographed model includes detailed occupants and road-car styling. It is a new 1:32 analog slot car, presented in the clear display case shown.
Fly Chevrolet Corvette C5 Safety Car
In stock
This Corvette C5 Safety Car recreates the red-and-white course car marked for the 1999 24 Hours of Le Mans. A roof beacon and sweeping black graphics define the photographed model. The 1:32 analog slot car is listed in new condition and shown in its clear display case.
Fly Chevrolet Corvette C5R #12 Paginas Amarillas 2001
In stock
Fly Chevrolet Corvette C5R #12 Paginas Amarillas 2001
Fly Chevrolet Corvette C5R #2 Goodwrench 1e 24h Daytona 2001 *USED*
In stock
Bright yellow Goodwrench bodywork marks this used Fly Chevrolet Corvette C5R as the number 2 winner of the 2001 24 Hours of Daytona. The photos show the car unboxed on its black base, with a Fly card pictured separately. GMAC logos and the detailed race interior stand out across the livery.
Fly Chevrolet Corvette C5R #2 Goodwrench 1e 24h Daytona 2001 A123
In stock
The Fly Chevrolet Corvette C5R #2 Goodwrench is a stunning representation of the car that conquered the 2001 24 Hours of Daytona. This slot car is a tribute to the incredible teamwork of drivers Johnny O'Connell, Ron Fellows, Chris Kneifel, and Franck Fréon, who skillfully maneuvered their way to victory in this iconic endurance race. Crafted to a precise 1:32 scale, this model captures the essence of the real-life racing machine, complete with authentic details that reflect its winning heritage. An analog slot car, it is designed for enthusiasts who appreciate both the thrill of racing and the art of collecting. Whether displayed on a shelf or racing on a track, this Corvette C5R is a must-have for any slot car aficionado. Specifications Scale1:32 Release TypeAnalog slot car Features Theme2001 24 Hours of Daytona Winner
Fly Chevrolet Corvette C5R #2 Goodwrench 1e 24h Daytona 2001 A123 *USED*
In stock
This used Fly Chevrolet Corvette C5R #2 depicts the 2001 Daytona 24 Hours winner. Its yellow race livery carries Goodwrench, GMAC and Mobil 1 graphics. The car has been driven on track and is shown on a black display base.